LuxpowerTek PSHIELD 5.12 kWh — Outdoor Low-Voltage Battery
A 5.12 kWh LiFePO4 battery module (51.2 V, 100 Ah) built for outdoor installation: IP65 with built-in heating, 1C continuous discharge, and up to 32 units in parallel.
Key Specifications
- 5.12 kWh · 51.2 V · 100 Ah LiFePO4 module
- IP65 with built-in heating — designed for outdoor mounting
- 100 A continuous discharge (1C); up to 32 units in parallel
- ~6,000 cycles at 90% DoD; 10-year manufacturer warranty
The PSHIELD is LuxpowerTek's low-voltage battery designed specifically to live outside. Its IP65 enclosure and built-in heater keep the cells within their working range in cold weather — a capability most indoor low-voltage batteries do not have — so the module can be mounted on an external wall without a plant room.
Each module stores 5.12 kWh at 51.2 V (100 Ah) in lithium iron phosphate cells, and supports 100 A continuous discharge — a 1C rate, meaning the full capacity can be delivered in about one hour when the load demands it. Up to 32 modules can be connected in parallel, so a system can start with a single module and grow.
LiFePO4 chemistry is rated for around 6,000 cycles at 90% depth of discharge, and the module carries a 10-year manufacturer warranty. It is the natural storage partner for the SNA PRO-EU inverter in this catalog.
Key Specifications
- Capacity
- 5.12 kWh
- Nominal Voltage
- 51.2 V
- Rated Capacity
- 100 Ah
- Chemistry
- LiFePO4
- Cycle Life
- 6000 cycles
- Depth of Discharge
- 90%
- Protection Rating
- IP65
- Max. Units in Parallel
- 32
- Warranty
- 10 years
Specifications are taken from the manufacturers' published datasheets (Deye, LONGi, JinkoSolar, LuxpowerTek) and may be updated by the manufacturer without notice.