Product Catalog
The catalog below covers the equipment we currently install: solar panels, hybrid inverters and battery storage. Each page explains what the product is, why it is built the way it is, and lists the key figures taken from the manufacturer's official datasheet. This is a reference catalog — availability changes, and prices depend on the project, so please contact us for a current quotation.
Solar Panels
LONGi Hi-MO X10 — LR7-72HVD-650M
A 650 W dual-glass bifacial module built on LONGi's back-contact (HPBC) cell platform, engineered for maximum energy density per roof square meter.
View Details →
JinkoSolar Tiger Neo 3.0 — JKM650N-66QL6-BDV
A 650 W N-type TOPCon bifacial module from JinkoSolar's Tiger Neo 3.0 platform, built for high-density commercial installations.
View Details →Hybrid Inverters
Deye SUN-K-SG0xHP3-EU — Three-Phase Hybrid Inverters
A scalable three-phase hybrid inverter platform, 15 kW to 50 kW, built around a shared high-voltage battery architecture for commercial and light-industrial self-consumption.
View Details →
LuxpowerTek TriP2-HB-3P 30K — Three-Phase Hybrid Inverter
A 30 kW three-phase hybrid inverter on a high-voltage battery bus (100–800 V), with three MPPT trackers, up to 45 kW of PV and a 97.4% peak efficiency.
View Details →
LuxpowerTek SNA PRO-EU 6.5K — Single-Phase Eco Hybrid Inverter
A 6.5 kW single-phase inverter from LuxpowerTek's Eco Hybrid line: works on-grid or fully off-grid with seamless switching, on a common 48 V battery, in an IP65 outdoor enclosure.
View Details →Battery Storage
Deye BOS-G — Modular High-Voltage Battery System
A rack-mounted, stackable LiFePO4 battery platform (5.12 kWh per module) built for commercial and light-industrial self-consumption systems.
View Details →
Deye GB-L Pro — Compact High-Voltage Battery System
A smaller-format, high-voltage stackable LiFePO4 platform (4.09 kWh per module) sized for residential and small-commercial hybrid systems.
View Details →
LuxpowerTek PSHIELD 5.12 kWh — Outdoor Low-Voltage Battery
A 5.12 kWh LiFePO4 battery module (51.2 V, 100 Ah) built for outdoor installation: IP65 with built-in heating, 1C continuous discharge, and up to 32 units in parallel.
View Details →
LuxpowerTek C5 — High-Voltage Rack Battery Module 5.12 kWh
A 5.12 kWh high-voltage LiFePO4 module for a rack of 2 to 10 units — 10.24 to 51.2 kWh in 5 kWh steps, at a 1C charge/discharge rate, managed from a 7-inch touch screen.
View Details →Accessories & Racks
Battery management units, distribution units, mounting racks and bases that complete the storage systems above. Each is sold and installed as part of its battery family — click through for the full system page.
Deye BOS-G-PDU-2 — Battery Cluster Control Unit
The management and protection unit of a BOS-G battery stack: it balances, protects and connects 3 to 12 BOS-G modules to the hybrid inverter as one battery.
View Details →
Deye 3U-HRACK-2G — 13-Layer Battery Rack
The larger of the two BOS-G cabinets: 13 layers for up to 12 battery modules plus the PDU, for stacks of roughly 15 to 61 kWh.
View Details →
Deye 3U-LRACK-2G — 9-Layer Battery Rack
The compact BOS-G cabinet: 9 layers for up to 8 battery modules plus the PDU, where floor space or the target capacity is smaller.
View Details →
Deye GB-LBS-PRO — Battery Management Unit for GB-L Pro
The control unit of a GB-L Pro stack: it manages, protects and connects 2 to 6 GB-LM4.0-PRO modules to the inverter.
View Details →
Deye GB-LBase — Mounting Base for GB-L Pro
The floor base on which GB-LM4.0-PRO modules are stacked: levels the stack, carries its weight and keeps the modules aligned.
View Details →Specifications are taken from the manufacturers' published datasheets (Deye, LONGi, JinkoSolar, LuxpowerTek) and may be updated by the manufacturer without notice.