LuxpowerTek TriP2-HB-3P 30K — Three-Phase Hybrid Inverter

Key Specifications

  • 30 kW three-phase hybrid — solar, battery and grid in one enclosure
  • High-voltage battery bus 100–800 V; pairs with the C5 rack battery
  • 3 MPPT trackers, up to 45 kW PV (150% oversizing)
  • 97.4% peak efficiency, IP66 outdoor-rated enclosure
  • 5-year manufacturer warranty; LuxCloud remote monitoring

The TriP2-HB-3P 30K belongs to LuxpowerTek's high-voltage three-phase hybrid line. It manages solar generation, battery charge and discharge, and grid exchange from a single enclosure, and it runs the battery on a high-voltage bus (100–800 V) so that the same power flows at lower current — smaller cables, smaller fuses and lower losses at this system size.

Three independent MPPT trackers accept up to 45 kW of PV, a 150% oversizing ratio relative to the 30 kW AC rating. That headroom matters on roofs with more than one orientation, and it lets the array keep delivering close to rated AC power in winter and on hazy days when panels run well below their nameplate.

Peak conversion efficiency is 97.4%, and the enclosure is rated IP66 — a step above the IP65 usual for this class — so the inverter can be mounted outdoors in harsher exposure without an additional cabinet. Unbalanced three-phase loads are supported, and backup output continues during a grid outage when paired with a compatible LuxpowerTek high-voltage battery such as the C5 rack in this catalog.

LuxpowerTek covers the unit with a 5-year manufacturer warranty, and the system reports to the LuxCloud monitoring platform for remote supervision.

Key Specifications

Rated Power
30 kW
MPPT Trackers
3
Max. PV Input
45 kWp
Battery Voltage Range
100-800 V
Max. Efficiency
97.4%
Protection Rating
IP66
Product Warranty
5 years

Specifications are taken from the manufacturers' published datasheets (Deye, LONGi, JinkoSolar, LuxpowerTek) and may be updated by the manufacturer without notice.